Full Automatic Spiral Wound Gaskets Machine

Full Automatic Spiral Wound Machine

Basic type HEROOS-M390 and Inner Ring type HEROOS-M390R

Scope of application:
3.2 or 4.5
Φ19-Φ80 Basic Graphite Spiral Winding Gasket

1, To achieve the automatic feeding of gasket inner ring, graphite tape and steel strips, fully automated production process control, greatly improves production efficiency and consistency of production.

2, The spiral wound machine can be wrapped around the spacer pad ranges from 1/2 “- 2 “ gasket. And radial pads, flatness adjustable.

3, Using a servo motor as the driving force, to achieve precise control, allowing for higher dimensional consistency, easy to assemble.

4, To achieve the PLC control, and with a touch screen, you can easily set the parameters, and switch between manual and automatic, and can be stored in different product parameters to meet customers, especially many varieties of small batch production mode requires.

5. Realize the automatic strip forming process, eliminating the need for pre-compression molding process. At the same time, the strip is 20 kg on the machine at a time, compared to the 3-5 kg belt reel loading mechanism on the traditional machine. It greatly saves the time of steel belt feeding.

6, Automatic welding, compared to traditional manual welding. In addition to greatly improve efficiency, but also has the effect of welding, weld consistency high, uniform distribution of solder joints and many other advantages.

7, Mold automatic ejection, after the completion of the winding, automatic mold shrinkage, no cylinder or mechanical stripping force.